Job Sheet-25M5860E_F2304-S5.wnc

Path : D:\sejong\model\2025\25M5860E\2304\2304-8\ Geometry : 25M5860E_F2304_CNV-250918.x_t.wnc P/G : M04960 Sep29.htm
X_Min : -379.500,          X_Set_A :   -384.500 Y_Max : 160.506,          Y_Set_A :   165.506 Z_Max : 0.001
X_Max : 379.500,          X_Set_A :   384.500 Y_Min : -0.000,          Y_Set_A :   -5.000 Z_Min : -75.000
X_Center : 0.000 Y_Center : 80.253
X_Length 759.00 Y_Length 160.51 Z_Length 75.00

images/basepart.png
       Warning,,,Y Eccentric,,, :Y_Center : 80.25 
..
---|Warning---Z_Max: : 0.00 ---
---|Warning---Z_Min : : -75.00 ---
---MC960 -25M5860E_F2304-S5.wnc Sep29.jpg---- , Programmer's Comment : 슬라이드 코어
NCD Toolpath Type T_No Cutter Image D,∮ R_cn Holder Safe Tool Length Zmin
(R_cen) 		Stock Krpm Time
D1 BALL : 1.10mm
D0.6 BALL : 0.40mm
O3722.i Optimized Z-Level Finishing 15 ToolpathCutterShape 1.00 R:0.50 Ball-end, FPT-SHR04-40L-10 17.90 -22.36 0.00 18.0 02:19
O3723.i 3D Contouring -Pencil Trace- 15 ToolpathCutterShape 1.00 R:0.50 Ball-end, FPT-SHR04-40L-10 18.30 -22.04 0.00 17.9 00:04
O3724.i Planar Finishing 16 ToolpathCutterShape 0.60 R:0.30 Ball-end, FPT-SHR04-40L-10 18.50 -22.58 0.00 12.0 00:00
O3725.i Planar Finishing 16 ToolpathCutterShape 0.60 R:0.30 Ball-end, FPT-SHR04-40L-10 18.50 -22.02 0.00 12.0 00:00
22 23 24 25, Selected : 151550.00mm Total Time : 02:24
(Each-PP) : 10_Datum === 10-Fine +M08+ === ,   Saved File Name : M04960 25Sep29.htm, Save time : 18:32:23 , Saved Counter : 25
---Sort By Tool_NO--- Se Jong Precision Machinery Co. LTD, Tel : 031 666 1325, Fax : 031 666 1327 ---EnLarge Image---